Product Usage:
DT-IP98 for powder metallurgy iron-based parts of the infiltration of copper, used to improve the iron-based products, density, crush strength, surface hardness;
Copper is divided into directional copper and non-directional copper, this product is mainly for iron-based powder metallurgy non-directional copper with.
Product Features:
Excellent formability
High embryo strength
High penetration efficiency
Do not erode iron-based parts
Non-bonded iron base, easy to remove the residue
Powder performance | Test Methods | lower limit | Upper limit |
Copper content，% | Chemical testing | balance | |
other，% | | 3 | 5 |
Lubricant，% | | | 0.50 |
Loose density，g/cm3 | MPIF 04 | 3.35 | 3.65 |
Liquidity，sec/50g | MPIF 03 | | 40 |
Particle size distribution，ISO% | MPIF 05 | | |
+60 mesh（>250μm） | | | 2.0 |
-60/+100 mesh | | | 15 |
-100/+150 mesh | | | 20 |
-150/+325 mesh | | | balance |
-325 mesh（<45μm） | | 40 | 60 |
Forming performance |
Forming density，g/cm3 | MPIF45 | 7.0 | |
Health intensity，MPa | MPIF15 | 8 | |
Copper penetration performance |
Copper penetration efficiency test based on LAM102, 1121 +/- 2 oC above the insulation 30 min, reducing atmosphere. Copper penetration efficiency up to 98%. |
